Sand Drying System for removing the moisture in the sand
Magnetic Separator and Dust Collecting equipment for removing unwanted iron particles and burnt sand particles from the return sand
Water Sprinklers to decrease the temperature of the return sand to ambient levels with the help of temperature sensors
Resin or No Bake Moulding System (Furan Resin)
Plant has 2 mixers with a capacity of 5.0 MT/hr with an automatic pneumatic sand reclamation system
Equipped with a sand-cooling tower of 10 ton per hour capacity to tackle problems arising due to high temperature
Casting weight of up to 5000 kgs per piece
Superior surface finish due to easy disintegration of sand from casting
Cold Box Core System
Equipped with an Automatic Laempe Cold Box Core Shooting Center with intensive sand mixing plant
Laempe core shooting system comprises of core shooters of 40 litre, 10 litre and 5 litre capacity and a Laempe mixture of capacity 4.2 MT
Core boxes of 2 to 6 parts are possible
M/C Size
Max Core Weight
Core box Width
Core box Depth
Core Box height
(Kgs)
(mm)
(mm)
(mm)
L40
55
600/1190
1000
900
LlO
14
350/695
700
480
L5
7.5
200/370
400
375
Moulding Lines
HFM 70 High Pressure
HFM 70 High-Pressure Vacuum Squeeze flaskless molding line with horizontal parting.
Automatic Mould and Flask Handling System.
Mould size can vary between 820 X 820 X 400 mm to 820 X 820 X 560mm.
Can function at a maximum speed of 90 coreless moulds per hour
Combination of high-pressure vacuum shooting and hydrodynamic squeezing helps in achieving a consistent mould hardness of 80-90 GF even with complicated contours and profiles.
Castings of up to 145 kgs gross weight and with a pattern draft of 0.07 degrees is possible in the machine
ARPA 900 Simultaneous Jolt Squeeze
1 set of ARPA 900 Jolt Squeeze Machines for making larger castings
Bi Rail System with hoist for mould lifting and closing
Box Size of 1000x1000x200/200 & 1000x1000x400/400
Castings of up to 350 kgs gross wt possible in a single piece.
DEMAN 450 Simultaneous Jolt Squeeze
2 sets of DEMAN 450 Jolt squeeze machine to cater to the smaller castings
Bi Rail System with hoist for mould lifting and closing
